DJ65M(4.4)6.35mm Female to 4.4mm Male Adapter(4.4 plug version) Design and featuresTo ensure lossless music signal transmission during the conversion, the DJ65M is the first to use the HiFi desktop device socket for the adapter, which has excellent conductivity performance. Combined…
DJ44K M24.4mm Ground Pin Adapter — Exclusively for AstellKern Players Making 2.5mm balanced even strongerThanks to the interface uniformity of AstellKern players, the DJ44K M2 is able to convert almost all the players with both 2.5mm and 3.5mm jacks to…
DJ44MOJO4.4mm Ground Pin Adapter — Exclusively for Chord Mojo Allow you to use 4.4mm earphones on MOJOSince MOJO is only equipped with two 3.5mm headphone jacks, so an adapter is required if you want to use 4.4mm earphones on it.…
DJ44S7004.4mm Ground Pin Adapter — Exclusively for SONY NW-ZX706 and NW-ZX707 All-in-one design with exclusivityThe DJ44S700 is designed exclusively for SONY NW-ZX706 and NW-ZX707 music players. It cleverly hides the gold bottom cover under the black top cover, while its…
Good partner for bundling useTC09L L-Shaped OTG Cable Good sound quality with compact sizeWhen enjoying lossless music via USB output from the phone to DAC AMP, the connected cable is especially important. Because of the greater force after folding, the…
TC01B TC01BFUSB-B to USB-C Converter Traditional USB-B is phasing outWith the popularity of USB-C interface, an adapter is always needed if you want to connect USB-B terminated devices, such as printers, traditional audio decoders to USB-C cables; by the same…
TC35M2Full-Featured USB-C to 3.5mm DAC AMP Adapter 2nd gen A good partner for wired earphonesThe TC35M2 is designed to bring convenience to wired earphones users. Compared with the previous generation, this 2nd generation upgraded the shell craftsmanship, and improved the…
HS270WWooden Headphone Stand The combination of wood and metalThe head beam and base of the HS270W headphone stand are made of raw wood and are available in walnut and beech. The walnut version uses black aluminum alloy support rod, and…
BC150B-490 Designed for Sennheiser HD 490 PRO Designed with dual connectorsWhy not use single-sided connector? Although the HD 490 PRO can be single plugged on one side to achieve balanced sound, yet considering the consistency of the left and right…
BC150B-MV Designed for Sony MDR-MV1 Single-sided 3.5mm balanced connectorAs shown in the diagram, the channel definition of the four-section connector on the BC150B-MV is different from that on the Chinese Standard 3.5Pro. Specially designed protective coverThe dual-wire and single-sided design…
