BLOG

Review
2026-7-17

ddHiFi Memory AL4.4 Review —— By SoundBsessive

Below are excerpts from the review: “I have tested the Memory AL4.4 with my ddHiFi Eye3, TC44Grip and Qudelix-5K (with ddHiFi DJ44B 4.4mm to 2.5mm balanced adapter). The Memory AL4.4 presents a largely neutral profile with a subtle touch of warmth and upper midrange tilt. Low frequencies are rendered with precision. Sub-bass reaches convincingly deep with a good sense of presence, while mid-bass remains controlled and avoids bleeding into the midrange, keeping the overall presentation clean and bloat-free. Vocals and…

Award
2026-6-25

Good News! ddHiFi TC19CC Gold Wins Award at VGP 2026 Summer

Recently, the official results of the VGP 2026 Summer Awards, Japan’s most authoritative audio-visual product selection, were officially announced. ddHiFi TC19CC Gold flagship pure silver digital signal cable stood out from the fierce competition and won the “Award in the USB Cable Category” with its outstanding acoustic performance and innovative product design. 🏆 About the VGP Awards VGP (Visual Grand Prix), founded in 1987 and hosted by Japan’s renowned audio publishing house Ongen Shuppan, is one of the most authoritative…

Release
2026-6-22

TC19BC Comet Gold Pure Silver Digital Signal Cable (Gold Edition) Available Now!

TC19BC Comet Gold Pure Silver Digital Signal Cable (Gold Edition) Five Sets of Parallel ConductorsBuilding on the soft flexibility of flat cables, Comet Gold introduces a five‑conductor parallel structure. Power lines run along both sides, separated by CC signal conductors in the center. The data lines use pure silver conductors, with two independently insulated pairs twisted together and wrapped in gold‑plated shielding. This five‑parallel design enables faster device recognition and is ideally suited for one‑meter data transmission. Gold‑Plated Copper PlugThe…

Release
2026-6-22

BC44Gold 4.4mm Balanced Audio Cable Available Now!

BC44Gold4.4mm Balanced Audio Cable Flexible Symmetrical Double-Strand Shielded CableThe conductors of BC35Gold cable adopt a 2+2+1 structure. The signal wires and loop ground wires are constructed from distinct conductor materials, each consisting of two twisted conductor sets, with an outer cross shielding mesh wrapped around the outermost layer. The symmetrical double-strand design delivers excellent flexibility during bending and minimizes internal stress of wire cores. Its parallel twisted structure effectively suppresses electromagnetic interference while transmitting audio signals. Red Sandalwood & Aluminum…

Release
2026-6-22

BC35Gold 3.5mm Stereo Audio Cable Available Now!

BC35Gold3.5mm Stereo Audio Cable Flexible Symmetrical Double-Strand Shielded CableThe conductors of BC35Gold cable adopt a 2+2+1 structure. The signal wires and loop ground wires are constructed from distinct conductor materials, each consisting of two twisted conductor sets, with an outer cross shielding mesh wrapped around the outermost layer. The symmetrical double-strand design delivers excellent flexibility during bending and minimizes internal stress of wire cores. Its parallel twisted structure effectively suppresses electromagnetic interference while transmitting audio signals. Red Sandalwood & Aluminum…

Release
2026-6-22

P58M-MR3 Attraction Pad for MOONRIVER3 Available Now!

P58M-MR3Attraction Pad for MOONRIVER3 Dongle Becomes a Phone CompanionLeveraging the magnetic wireless charging ring on your phone*, this attraction pad attaches your DAC/amp directly to the phone, turning it into a compact portable companion. *P58M-HC5 is compatible with the built‑in MagSafe magnetic ring on iPhones. Android devices require a MagSafe‑compatible case for attachment. Curved High‑Strength MagnetsDesigned specifically for the MOONRIVER3, this attraction pad replaces bulky full‑circle magnets with a segmented curved magnet array, significantly reducing its overall weight. Four high‑strength…

Release
2026-6-22

P58M-HC5 Attraction Pad for AK HC5 Available Now!

P58M-HC5Attraction Pad for AK HC5 Dongle Becomes a Phone CompanionLeveraging the magnetic wireless charging ring on your phone*, this attraction pad attaches your DAC/amp directly to the phone, turning it into a compact portable companion. *P58M-HC5 is compatible with the built‑in MagSafe magnetic ring on iPhones. Android devices require a MagSafe‑compatible case for attachment. Curved High‑Strength MagnetsDesigned specifically for the HC5, this attraction pad replaces bulky full‑circle magnets with a segmented curved magnet array, significantly reducing its overall weight. Four…

Release
2026-6-22

MD19S 100W Fast Charging USB-C Cable Available Now!

MD19S100W Fast Charging USB-C Cable Supports Up to 100W Charging, Two Length OptionsFitted with an E‑Marker chip inside the USB-C plug, this cable supports a maximum charging power of 100W, though the actual charging power depends on the combined performance of your charger, cable and connected device; the device shown in the picture reaches approximately 95W maximum charging power for reference. This cable is available in 8cm and 100cm lengths. The short length is ideal for pairing with portable DAC/amps…

Release
2026-6-22

MD19L 100W Bendable Fast Charging USB-C Cable Available Now!

MD19L100W Bendable Fast Charging USB-C Cable Built-in Cable Loop Design, No More Loose Cable “Tail”When audiophiles connect wired earphones to smartphones, a portable DAC/amp (widely known as a “dongle”) is usually needed. It is named such since regular cables dangle loosely like a tail. The MD19L features an integrated cable loop at the plug end. Thread the cable through the loop and tuck it behind your phone. When paired with magnetic DAC/amps, it eliminates messy protruding cables to keep your…

Release
2026-6-22

DJ30SE 4.4mm Male to 3.5mm Female Single-Ended Adapter Available Now!

DJ30SE4.4mm Male to 3.5mm Female Single-Ended Adapter Professional Balanced-to-Single-Ended Signal ConversionThis adapter does NOT simply short the negative balanced channel to ground — such improper wiring would raise load risk and damage your audio devices. Its precise circuit taps the positive left & right signals from the 4.4mm balanced output, and routes return current to the native ground pin of the 4.4mm port. It utilizes half of the balanced output power to deliver a clean single-ended signal.*Note: This DJ30SE cannot…

网站维护公告 Maintenance Notice